Toyota 2016 Tacoma Owner's Manual page 401

■
Close the tonneau cover
1
Remove the straps while
pushing the release lock.
Confirm that there is no tie-down
cleat in the latch position before
closing the tonneau cover.
2
Close the tonneau cover and
push down on the top sur-
face (latch position) until it
clicks.
After closing the tonneau cover,
try pulling it up towards you to
make sure
securely locked. Confirm cargo
and cleats do not interfere with
tonneau cover
completely closing.
■
Remove and install the tonneau cover
1
Open the cap and remove
the bolt.
2
Open the rear and center tonneau cover.
3
Secure by using the storage straps.
4
Pull the lever and lift to
remove the tonneau cover.
6-3. Using the storage features
all latches are
latching and
I n f o r ma t i o n P r o v i d e d b y :
401
6
STY63BD024