Download  Print this page

Setting The Power On Mode; Enabling/Disabling The Front Panel Controls - NEC PlasmaSync 42XM5 User Manual

Plasmasync plasma monitor
Hide thumbs

Advertisement

Table of Contents
The "REPEAT TIMER" screen appears.
Adjust the items.
Use the
and
buttons to select "SINGLE".
Use the L and M buttons to select the item, then press the
and
buttons to set.
REPEAT TIMER
REPEAT TIMER
1 WORK TIME
INPUT MODE
2 WORK TIME
INPUT MODE
SEL.
ADJ.
Information
REPEAT TIMER function
* The two repeat timers run consecutively, i.e., Timer 1-
Timer 2-Timer1-Timer2.
* This becomes effective when the on-screen menu goes
out.
SINGLE settings
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
* Set the DIVIDER "OFF" and ID NUMBER "ALL"
before the operation.
MULTI settings
MODE: Select the input mode to be displayed from
"SINGLE", "S BY S1~3" and "PICTURE IN
PICTURE (BTM LFT~TOP LFT)".
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
Select "MAIN" or "SUB" for "PICTURE IN PICTURE
(BTM LFT~TOP LFT)" and "LEFT" or "RIGHT" for
"S BY S1~3".
Only one signal is selected for "SINGLE".
REPEAT TIMER
REPEAT TIMER
1 MODE
WORK TIME
INPUT MODE
MAIN
SUB
2 MODE
WORK TIME
INPUT MODE
LEFT
RIGHT
SEL.
ADJ.
* Set the DIVIDER "OFF" and ID NUMBER "ALL"
before the operation.
VIDEO WALL settings
DIVIDER: Divide the screens into 1, 2 2 or 3 3
sections.
WORK TIME: Set the time duration of the display.
Time range is from 1 minute to 24 hours.
INPUT MODE: Set the signal that will be displayed.
* Turn on the AUTO ID and set the DIVIDER (at 1, 2 2
or 3 3) before the operations.
* In the case of Video Wall, timer No.1 can be used to
control all the displays simultaneously.
REPEAT TIMER
REPEAT TIMER
1 DIVIDER
WORK TIME
INPUT MODE
2 DIVIDER
WORK TIME
INPUT MODE
SEL.
ADJ.
:
SINGLE
:
00H10M
:
VIDEO1
:
00H15M
:
DVD1
EXIT
RETURN
:
MULTI
:
BTM LFT
:
04H00M
:
RGB1
:
VIDEO1
:
S BY S1
:
02H30M
:
RGB3
:
DVD1
EXIT
RETURN
:
VIDEO WALL
:
1
:
00H03M
:
VIDEO1
:
2
2
:
00H06M
:
RGB1
EXIT
RETURN

Setting the power on mode

This function sets the input mode and the sound volume
at the time the power is switched on.
Example: Setting the input mode to "VIDEO2"
On "OPTION3 " menu, select "PWR.ON MODE ", then
press the MENU/ENTER button.
The "PWR.ON MODE " screen appears.
On "INPUT " of "PWR.ON MODE " menu, select
"VIDEO2".
The available inputs depend on the setting of input.
INPUT
VOLUME
SEL.
Information
INPUT settings
LAST: Last mode (the input that was last selected at
the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
DVD/HD1, 2: DVD/HD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See
page En-31.
PICTURE IN PICTURE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
:
BOTTOM LEFT
INPUT MODE
MAIN
:
DVD/HD1
SUB
:
VIDEO1
SEL.
ADJ.
RETURN
EXIT
VOLUME settings
LAST: Last mode (the volume that was last selected at
the time the power was switched off).
0 to 42: The level of sound volume.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.
Example: Setting "ON"
On "CONTROL LOCK" of "OPTION3" menu, select
"ON", then press the MENU/ENTER button.
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
REMOTE ID
ID NUMBER
VIDEO WALL
NEXT PAGE
SEL.
Information
CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
* Even when the CONTROL LOCK is set, the POWER
switch will not be locked.
* This becomes effective when the on-screen menu goes
out.
En-32
PWR. ON MODE
:
VIDEO2
:
LAST
ADJ.
RETURN
EXIT
SIDE BY SIDE
PWR. ON MODE
MULTI SCREEN SETTING
MULTI MODE
:
SIDE BY SIDE1
INPUT MODE
LEFT
:
DVD/HD1
RIGHT
:
VIDEO1
SEL.
ADJ.
RETURN
EXIT
OPTION 3
3 / 4
:
ON
:
ON
:
OFF
:
ALL
:
ALL
ADJ.
EXIT
RETURN

Advertisement

Table of Contents
loading

  Related Manuals for NEC PlasmaSync 42XM5