50XM6 Installation Guide
50" Plasma Display
Color Correction: NEC AccuCrimson (in front filter)
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Maximum Tilt Angles
Below are the maximum angles that the display can be tilted in both landscape and portrait mode
Screen Surface: Anti-Reflective
NEC Corporation of America
Visual Systems Division
48.11" (W) x 28.98" (H) x 3.90" (D)
Page 1 of 11