Operations In The Picture-In-Picture Mode; Selecting The Input Signals To Be Displayed; Zooming In On A Specific Input; Adjusting The Osm Controls - NEC PlasmaSync 42XM5 User Manual

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor
or button.
VIDEO1 RGB2
button
A
B
button
Top Left
button button
button
VIDEO1 RGB2
B
A
button
Bottom Left
To change the size of the sub screen, press the
VIDEO1 RGB1
B
A
VIDEO1 RGB1
B
A
button
VIDEO1
A
button
button
To make the desired picture active, press the SELECT/
FREEZE button.
VIDEO1 RGB1
B
SELECT/
A
FREEZE
button
VIDEO1 RGB2
A
B
Top Right
button button
VIDEO1 RGB2
B
A
Bottom Right
button.
RGB1
B
VIDEO1 RGB1
B
A
button
VIDEO1 RGB1
B
A

Selecting the input signals to be displayed

1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Press the RGB/PC, VIDEO, or DVD/HD button.
Each press of the button changes the selection of the input
signal.
The INPUT SELECT button on the monitor can also be
used to change the selection.

Zooming in on a specific input

1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Use the POINTER button and the ZOOM /
enlage the picture.
For details, see "DIGITAL ZOOM" on page En-13.

Adjusting the OSM controls

1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see "OSM (On Screen Menu) Controls" on
page En-18.
Note:
During enhanced split screen, some functions of OSM
controls are not available.
En-17
button to