Setting The Screen Size For S1/S2 Video Input; Setting The Picture Size For Rgb Input Signals; Setting The Signal And Black Level For Dvi Signal; Setting The Protocol Set - NEC PlasmaSync 42XM5 User Manual

Setting the screen size for S1/S2 video input

If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting "S1/S2" to "AUTO"
On "S1/S2" of "OPTION2" menu, select "AUTO".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
CLOSECAPTION
CAPTION CONT
NEXT PAGE
SEL. ADJ.
Information
S1/S2 settings
AUTO: Adjusts the screen size automatically according
to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.

Setting the picture size for RGB input signals

Use this procedure to switch the setting to "ON" or "OFF".
* This function is available only for 50 and 60 inch types.
Example: Setting the "PICTURE SIZE" mode to
"OFF"
On "PICTURE SIZE" of "OPTION2" menu, select "OFF".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
CLOSECAPTION
CAPTION CONT
NEXT PAGE
SEL. ADJ.
2 / 4
: OFF
: ON
: 3
: AUTO
: ON
: OFF
: OFF
: LOW
RETURN
EXIT
2 / 4
: OFF
: ON
: 3
: OFF
: OFF
: OFF
: OFF
: LOW
RETURN
EXIT
En-29
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the "PLUG/PLAY" mode to "STB/
DVD"
On "OPTION2" menu, select "DVI SET UP", then press the
MENU/ENTER button.
The "DVI SET UP" screen appears.
On "PLUG/PLAY" of "DVI SET UP" menu, select "STB/
DVD".
DVI SET UP
PLUG/PLAY
BLACK LEVEL
SEL. ADJ.
Information
PLUG/PLAY settings
PC: When connected to the PC signal.
BLACK LEVEL is set to "LOW" automatically.
STB/DVD: When connected to the SET TOP BOX, DVD etc.
BLACK LEVEL is set to "HIGH" automatically.
BLACK LEVEL settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc.
Change "HIGH" into "LOW" if the black level appears gray.

Setting the Protocol set

Use this setting when connecting a device which uses
special protocol for RS-232C communication.
Example: Setting "ON"
On "PROTOCOL SET" of "OPTION2" menu, select "ON".
OPTION 2
PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
PROTOCOL SET
CLOSECAPTION
CAPTION CONT
NEXT PAGE
SEL. ADJ.
Information
PROTOCOL SET settings
ON: When special protocol is used.
OFF: When NEC protocol is used (normal).
* Consult your dealer for details of protocol.
: STB/DVD
: HIGH
EXIT RETURN
2 / 4
: OFF
: ON
: 3
: OFF
: ON
: ON
: OFF
: LOW
EXIT RETURN