Setting Unit Of Temperature Measurement - Piazzetta P963 Instructions For Installation, Use And Maintenance Manual

These functions are activated by opening the front flap and pressing the following keys:
- the MENU key is used to access the main menu and return to the initial display at any time during programming to alter data that has been input incorrectly;
- the MENU SELECT key is used to scroll through the main menu and the submenus;
- the SET key is used to confirm a MENU or a selection;
- the ESC is used to return to the previous menu display at any time during programming to alter data that has been input incorrectly.
• Whenever the keyboard is not used for about 3 ½ minutes, the display goes dark to reduce consumption.
• In a blackout and therefore with no reception by the stove, the display goes dark after about 20 seconds.

6.9 SETTING UNIT OF TEMPERATURE MEASUREMENT

This function allows the unit of temperature measurement in CELSIUS or in FAHRENHEIT to be set on the display.
Function
Selecting the UNIT OF Press the MENU button, use the MENU SELECTION button to select the
MEASUREM menu UNIT OF MEASUREM menu and the SET button to confirm.
Selecting the unit
Scroll with the MENU SELECTION button to find the required unit of
of temperature
temperature (F - Fahrenheit o C - Celsius) and confirm with the SET button.
measurement
After confirmation the readout FUNCTION ENABLED appears on the
display, which then automatically returns to the initial readout.
38
UNIT OF MEASUREMENT
Action
H07032120 / DT2002308 – 00
DT2011296-00
U N I T O F
Display
M E A S U R E M .
U N I T O F
M E A S U R E M .
U N I T O F
1
M E A S U R E M .
1
1
U N I T O F
M E A S U R E M .
U N I T O F
F
M E A S U R E M .
U N I T O F
1
F
M E A S U R E M .
1
F
1
F U N C T I O N
E N A B L E D
F U N C T I O N
E N A B L E D
F U N C T I O N
1
DT2040064-03
E N A B L E D
1
1