Piazzetta P963 Instructions For Installation, Use And Maintenance Manual page 48

If the room temperature continues to rise with operation at power level 1 up to the value set on the STOP function (e.g. +4 °F / +2 °C compared to
the programmed temperature), the stove shuts down and goes into the stand-by mode.
When the room temperature measured by the room sensor or the remote control drops to the temperature value set by the user on the START
function (e.g. -6 °F / -3 °C compared to the programmed temperature), the stove starts a new ignition phase and goes back to the power level
previously set by the user.
a
The stove only restarts when the temperatures measured on the actual stove allow its use in all safety.
If the STOP and OFF functions are enabled, upon reaching the programmed room temperature, the stove will operate in the conventional way by
going to power level 1 without shutting down.
Likewise with the START and OFF enabled the stove does not start the startup/ignition phase after automatic shutdown and will remain off.
If the ENERGY SAVING has been set, the chrono mode handles only the start and stop of the programmed time slots.
a
The external thermostat cannot be activated if the ENERGY SAVING is active.
Function
Select the ENERGY Press the MENU key, then using the SELECT MENU key select the ENERGY
SAVING menu SAVING function and confirm by pressing the SET key.
Press the SELECT MENU key and then select the temperature set point 2,
Select the value to
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
be set for shutdown
temperature
Confirm by pressing the SET key.
Press the SELECT MENU key and then select the temperature set point 2,
Select the value to
4 or 6 °F (1, 2 or 3 °C) or disable the function by selecting OFF.
be set for ignition
temperature
Confirm by pressing the SET key.
After confirmation using the SET key, the readout FUNCTION ENABLED is
displayed and the readout ENS (ENERGY SAVING) appears on the main
display.
Upon reaching the temperature set in the STOP function, the stove starts
the shutdown stage.
The readout ENERGY SAVING OK appears on the display.
48
ENERGY SAVING
Action
H07032120 / DT2002308 – 00
Display
E N E R G Y
E N E R G Y
E N E R G Y
E N E R G Y
S A V I N G
S A V I N G
E N E R G Y
S A V I N G
S A V I N G
S A V I N G
1
1
1
1
1
S T O P
S T O P
S T O P
S T O P
S T O P
2 F
2 F
2 F
2 F
1
2 F
1
1
1
1
S T A R T
S T A R T
S T A R T
S T A R T
S T A R T
O F F
O F F
O F F
O F F
1
O F F
1
1
1
1
L E V E L
L E V E L
L E V E L
L E V E L
E N S P 2
E N S P 2
E N S P 2 L E V E L
E N S P 2
E N S P 2
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1
1 2 : 0 0 7 3 F
1
1
1
1
E N E R G Y
E N E R G Y
E N E R G Y
E N E R G Y
S A V I N G O K
S A V I N G O K
E N E R G Y S A V I N G O K
S A V I N G O K
S A V I N G O K
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1 2 : 0 0 7 3 F
1
1 2 : 0 0 7 3 F
1
1
1
DT2040124-00
1