Security - DFI BT551 User Manual

Hardware Monitor
This field only displays the hardware monitor status.
InsydeH20 Setup Utility
Advanced
Hardware Monitor
Voltage
0.904 V
VCORE
VDDQ 1.337 V
+12V 11.904 V
5V 5.080 V
Temperature
System ( o C/ o F) 41 o C/105 o F
o o
CPU ( o C/ o F) 42 C/107 F
Fan Speed
SYS FAN 0 RPM
F1 Help ↑↓ Select Item F5/F6
Esc Exit ←→  Select Menu Enter
Chapter 3 BIOS Setup
Rev. 5.0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3

Security

Main Advanced
Select TPM Device
TPM 1.2 Status
TPM Operation
Supervisor Password
User Password
Set Supervisor Password
Set User Password
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu

Select TPM Device
Initialize the selected TPM device..
TPM Operation
Enable or disable the TPM function. This option will automatically return to
No-Operation.
Set Supervisor Password
Set the supervisor's password and the length of the password must be greater than
one character.
34
InsydeH20 Setup Utility
Security Power Boot Exit
Select TPM Device to ini-
<TPM 1.2>
tialize
Enable and Active
<No operation>
Not installed
Not installed
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi .com