DFI BT551 User Manual page 30

Audio Configuration
This section is used to configure the audio settings.
InsydeH20 Setup Utility
Advanced
Audio Confi guration
Audio Controller <Enabled>
F1 Help ↑↓ Select Item F5/F6
Esc Exit ←→ Select Menu Enter

Audio Controller
Control the detection of the Azalia device.
Disabled
Azalia will be unconditionally disabled.
Enabled
Azalia will be unconditionally enabled.
Auto
Azalia will be enabled if present, disabled otherwise.
Chapter 3 BIOS Setup
Rev. 5.0
Control Detection of the
Azalia device.
Disabled = Azalia will be
unconditionally disabled.
Enabled = Azalia will be
unconditionally enabled.
Auto = Azalia will be ena-
bled if present, disabled
otherwise.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Miscellaneous Configuration
This section enables or disables Misc. features.
Advanced
State After G3
OS Selection
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu

State After G3
Specify what state to go when the power is reapplied after a power failure. (G3 state).
OS Selection
Select the OS support: Linux or Windows.
30
InsydeH20 Setup Utility Rev. 5.0
Specify what state to go to
<S5 State>
when power is re-applied
<Windows>
after a power failure (G3
state).
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi .com