DFI BT551 User Manual page 33

SIO NUVOTON6106D
This section configures the system super I/O chip parameters.
InsydeH20 Setup Utility
Advanced
SIO NUVOTON6106D
 Smart Fan Control

<Auto>
Serial Port 1
Serial Port 2 <Auto>
<Auto>
Serial Port 3
<Disable>
WDT
<Disable>
Case Open
 Hardware Monitor

F1 Help ↑↓ Select Item F5/F6
Esc Exit ←→ Select Menu Enter

Serial Port 1 to Serial Port 3
Configure the settings to use the serial port.
Disable No configuration
Enable User confi guration
Auto EFI/OS chooses confi guration
Case Open
Enable or disable the case open.
Chapter 3 BIOS Setup
Rev. 5.0
Enable/Disable Smart Fan.
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit

Chapter 3
Smart Fan Control
This field enables or disables the smart fan control.
Advanced
System Smart Fan Control
System Fan Mode
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
F1 Help ↑↓ Select Item
Esc Exit ←→  Select Menu
System Smart Fan Control
Enable or disable the system smart fan.
Boundary 1 to Boundary 4
Set the boundary temperature. The range is from 0-127
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 0-100%.
33
InsydeH20 Setup Utility
Enable System Smart Fan.
<Enable>
<SMART FAN IV>
[30]
[40]
[50]
[60]
[20]
[30]
[50]
[75]
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

C.
o
Rev. 5.0
www.dfi .com