Operating Your Radio - Dab - Roberts Gemini RD-45 User Manual

Operating your radio - DAB

1. Carefully extend the telescopic aerial.
2. Press and release the On/Off button to switch on your radio. The On
indicator will light and the display will show 'Roberts Enjoy Listening'
for a few seconds.
3. If this is the fi rst time the radio is used a scan of the Band III DAB
channels will be carried out. If the radio has been used before the last
used station will be selected.
4. During the scanning process, the display will show 'Scanning' and as
each group of stations is detected the station count will be updated.
The bottom line of the display shows a bar graph indicating progress
of the scan.
5. When the scan is completed the fi rst station (in numeric-alpha order
0...9...A....Z) will be selected. The fi rst station in the list of stations
found will be played. The display will show the station name in the
fi rst line of the display and other information in the second line.
6. If no signals are found it may be necessary to relocate your radio to
a position giving better reception. You should then carry out an auto
tune to fi nd stations as described on page 9 (see Finding new stations
on page 9).
Roberts
Enjoy Listening
2
Scanning...
BBC R2
Connecting...
24
DAB
6