Analog Input Register Group - National Instruments DAQ AT-MIO-16X User Manual

Analog Input Register Group

© National Instruments Corporation
The two registers making up the Analog Input Register Group control
the analog input circuitry and can be used to read the ADC FIFO.
Reading from the ADC FIFO Register location transfers data from the
AT-MIO-16X ADC FIFO buffer to the PC. Writing to the
CONFIGMEM Register location sets up channel configuration
information for the analog input section. This information is necessary
for single conversions as well as single- and multiple-channel data
acquisition sequences.
Bit descriptions of the two registers making up the Analog Input
Register Group are given on the following pages.
Chapter 4
4-31
Register Map and Descriptions
AT-MIO-16X User Manual