Table of Contents
Advertisement
Appendix A
Specifications
Safety
Maximum Working Voltage
Electromagnetic Compatibility
For full EMC and EMI compliance, you must operate this device with shielded
Note
cabling. In addition, all covers and filler panels must be installed. Refer to the Declaration
of Conformity (DoC) for this product for any additional regulatory compliance
information. To obtain the DoC for this product, click Declaration of Conformity at
ni.com/hardref.nsf/
appropriate product family, followed by the product, and a link to the DoC (in Adobe
Acrobat format) appears. Click the Acrobat icon to download or read the DoC.
NI 6115/6120 User Manual
Relative humidity ...................................10 to 90% noncondensing
Pollution Degree (indoor use only) ........2
The NI 6115/6120 was evaluated using the criteria of EN 61010-1 a-2:1995
and meets the requirements of the following standards for safety and
electrical equipment for measurement, control and laboratory use:
•
EN 61010-1, IEC 61010-1
•
UL 3111-1
•
CAN/CSA C22.2 No. 1010.1
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth .....................................42 V, Installation Category I
Channel-to-channel.................................42 V, Installation Category I
EMC/EMI ...............................................CE, C-Tick, and FCC Part 15
Emissions................................................EN 55011 Class A at 10 m
Immunity ................................................Evaluated to EN 61326:1998,
. This Web site lists the DoCs by product family. Select the
(Class A) Compliant
FCC Part 15A above 1 GHz
Table 1
A-18
ni.com
Advertisement
Table of Contents
