Table of Contents
Advertisement
About This Manual
Conventions
<>
»
♦
© National Instruments Corporation
This manual describes the electrical and mechanical aspects of the
NI 6115/6120 and contains information concerning its operation
and programming.
The NI 6115/6120 family includes the following devices:
•
NI PCI-6115
•
NI PXI-6115
•
NI PCI-6120
•
NI PXI-6120
The NI 6115/6120 is a high-performance multifunction analog, digital, and
timing I/O data acquisition (DAQ) device for PXI and PCI bus computers.
Supported functions include analog input (AI), analog output (AO),
digital I/O (DIO), and timing I/O (TIO).
The following conventions appear in this manual:
Angle brackets that contain numbers separated by an ellipsis represent a
range of values associated with a bit or signal name—for example,
DIO<3..0>.
The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page Setup item, and select Options
from the last dialog box.
The ♦ symbol indicates that the following text applies only to a specific
product, a specific operating system, or a specific software version.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this symbol is marked on
the product, refer to the
Introduction, for precautions to take.
Safety Information
section of Chapter 1,
xi
NI 6115/6120 User Manual
Advertisement
Table of Contents
