Hazardous Locations; Electromagnetic Compatibility - National Instruments NI USB-6525 User Manual And Specifications

Do not use this module for connection to signals or for measurements within
Caution
Measurement Categories II, III, or IV.
Environmental

Electromagnetic Compatibility

Note For EMC compliance, operate this device according to product documentation.
USB-6525 User Guide and Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Isolation
Channel-to-channel.................................60 VDC continuous
Channel-to-earth ground.........................60 VDC continuous
Withstand................................................60 VDC continuous

Hazardous Locations

The USB-6525 is not certified for use in hazardous locations.
The USB-6525 device is intended for indoor use only.
Operating temperature
(IEC 60068-2-1 and IEC 60068-2-2)......0 to 55 °C
Operating humidity
(IEC 60068-2-56) ...................................10 to 90% RH, noncondensing
Maximum altitude...................................2,000 m (at 25 °C ambient
Storage temperature
(IEC 60068-2-1 and IEC 60068-2-2)......–40 to 85 °C
Storage humidity
(IEC 60068-2-56) ...................................5 to 90% RH, noncondensing
Pollution Degree (IEC 60664) ................2
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
temperature)
12 ni.com