National Instruments Documentation - National Instruments Module SCXI-1125 User Manual

Chapter 1 About the SCXI-1125
For maximum allowable voltage for a particular terminal block refer to Table A-2,
Note
Terminal Block Maximum

National Instruments Documentation

SCXI-1125 User Manual
Voltages.
– SCXI or PXI/SCXI combination chassis
– One of the following:
• E/M Series DAQ device
• SCXI-1600 module
– A computer if using an SCXI chassis
– Cabling, cable adapter, and sensors as required for your
application
❑
Software
– NI-DAQ 7.0 or later
– One of the following software packages:
• LabVIEW
• LabWindows
• Measurement Studio
❑
Documentation
Read Me First: Safety and Radio-Frequency Interference
–
– DAQ Getting Started Guide
– SCXI Quick Start Guide
– SCXI-1125 User Manual
– Documentation for your hardware
– Documentation for your software
The SCXI-1125 User Manual is one piece of the documentation set for data
acquisition (DAQ) systems. You could have any of several types of
manuals depending on the hardware and software in the system. Use the
manuals you have as follows:
• SCXI or PXI chassis manual—Read this manual for maintenance
information on the chassis and for installation instructions.
• The DAQ Getting Started Guide—This document has information on
installing NI-DAQ and the E/M Series DAQ device. Install these
before you install the SCXI module.
™ ™
/CVI
1-2 ni.com