Sharp AR-M450 Service Manual page 69

Code
Main Sub
66 15 Used to set the make time in the FAX pulse dial mode (20PPS)
and to test the dial signal output. (The dial number signal set
with SIM 66-13 is outputted.) Used to check dialing troubles
and the operation. (Only when FAX is installed.)
16 Used to test the dial signal (DTMF) output in the FAX tone dial
mode. (The dial number signal set with SIM 66-13 is outputted.)
The send level can be set to an optional level.
Dialing troubles and operation.(Only when FAX is installed.)
17 Used to test the dial signal (DTMF) output in the Fax tone dial
mode. Send level 0db (Max.).Used to check the operation.
(Only when FAX is installed.)
18 Used to test the dial signal (DTMF) in the FAX tone dial mode.
The send level set with the soft switch is outputted. Used to
check the operation. (Only when FAX is installed.)
19 Used to backup the FAX SRAM data into the flash
Memory(Option FAX memory:AR-MM9)
(Only when FAX is installed.)
20 Used to restore the backup data (SIM 66-19) to SRAM.
(Only when FAX is installed.)
21 Used to print the FAX information (registrations, communication
management, file management, system errors).
(Only when FAX is installed.)
22 Used to adjust the handset sound volume.
(Only when FAX is installed.)
23 Used to download the FAX program.
(Only when FAX is installed.)
24 Used clear the FAST memory data.
(Only when FAX is installed.)
25 Used to register the FAX number for MODEM dial-in.
(Only when FAX is installed.)
26 Used to register the external telephone number for MODEM
dial-in. (Only when FAX is installed.)
27 Used to register the voice-warp transfer number.
(Only when FAX is installed.)
28 Used to record a sound message.
(Only when FAX is installed.)
29 Used to clear the telephone directory.
(Only when FAX is installed.)
30 Used to check TEL/LIU status change.
31 Used to set the TEL/LIU status.
32 Used to check received data.
33 Used to check signal detection.
34 Used to measure and display the communication time.
35 Modem program rewriting.(Only when FAX is installed.)
36 Used to check interface between MFPC and MDMC.
Check is made in the data line or the command line.
67 2 Used to check the parallel I/F operation of the printer.
(This simulation is made only in the production site and not in
the market. It requires a special tool.)
11 Used to set Enable/Disable of the parallel I/F select signal of
the printer.
16 Used to check the operation of the network card.
Function (Content)
AR-M350 SIMULATIONS 10-8
Purpose
Setup Fax
Setup Fax
Setup Fax
Setup Fax
Setup Fax
Setup Fax
Adjustment, setup, Fax
operation data output,
check (display, print)
Setup Fax
Inhibited Fax
Inhibited Fax
Inhibited Fax
Inhibited Fax
Inhibited Fax
Inhibited Fax
Setup Fax
Setup Fax
Setup Fax
Inhibited Fax
Inhibited Fax
Setup Fax
Operation test, check Fax
Operation test, check Fax
Inhibited Printer
Adjustment Printer
Operation test, check Printer
Section Item
Operation
Operation
Operation
Operation
Operation
Operation
Data
Operation
Operation
Operation
Operation
Operation
Operation
Operation
Interface,
communi-
cation
Operation Interface,
communi-
cation
Operation Interface,
communi-
cation