Sharp AR-M450 Service Manual page 107

46-25
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to adjust the scanner exposure level and to
make individual setup. (Super fine mode)
Section Scanner (reading)
Item Picture quality
Operation/Procedure 1) Select the exposure mode to be set.
(Scanner
adjustment)
The current set value is highlighted on the
right of each item. (Set value)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default 50, set range 0 - 99)
* The set value is changed only, and printing is not performed.
SIMULATION 46-25
EXP. LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-5, AND PRESS
START.
0. AUTO 50 1. LIGHT
50
3. AUTO(H) 4. LIGHT(H)
Select 0 -5 and
press [START] key.
SIMULATION 46-25
EXP. LEVEL SETUP SCANNER(ULTRA FINE), INPUT VALUE 0-99,
AND PRESS START.
0. AUTO
<Set value>
0 Auto
1 Bright
2 Dark
3 Auto (half tone)
4 Bright (Half tone)
5 Dark (Half tone)
super fine mode individual
50 2.DARK 50
50 50
5.DARK(H)
1
Press [START] key or
[CUSTOM SETTING] key.
50
AR-M350 SIMULATIONS 10-46