Operation Panel - Sharp AR-M450 Service Manual

2. Operation panel

When the printer is equipped with a scanner module, the operation panel on the main unit will become inoperative and the panel on the scanner module
must be used.
The operation panel on the printer engine side does not function.
1 Touch panel
2 Mode select keys and indicators Use to switch the display mode of the touch panel.
3 [PRINT] key/
READY indicator/
DATA indicator
4 [IMAGE SEND] key/
LINE indicator/
DATA indicator
5 [COPY] key
6 [JOB STATUS] key
7 [CUSTOM SETTINGS] key
8 Numeric keys
9 [*] key ([ACC.#-C] key)
10 [#/P] key*
11 [C] key*
12 Start key*
13 [CA] key*
The machine status, messages and touch keys are displayed on the panel. The display will change to show
the status of print, copy, network scan or fax according to which of those modes is selected.
Press to enter the print mode.
•READY indicator
Print data can be received when this indicator is lit.
•DATA indicator
Lights up or blinks when print data is being received. Also lights up or blinks when printing is being
performed.
Press to enter the network scan/fax mode.
•LINE indicator
During sending or receiving FAX data or scan data, this lamp is lighted.
•DATA indicator
Lights up or blinks when FAX data is being received. Also lights up or blinks when printing is being
performed.
Press to select the copy mode and display the basic screen of the copy mode.
Even when the machine is busy in another mode, the basic copy mode screen will appear when the [COPY]
key is pressed.
If this key is pressed and held while the basic screen of the copy mode is displayed, the total output count
and the quantity of toner remaining (percentage) will be displayed.
Press to display the current job status.
Use to adjust the contrast of the touch panel or to set key operator programs.
Use to enter number values for various settings.
If the auditing mode has been set, press this key to close an open account after finishing a copy, facsimile
scanning or network scanning job.
Press to select the job memory mode.
Press to clear a copy quantity entry.
If this key is pressed while the automatic document feeder is being used, any originals in progress will be
automatically output.
When the indicator is lit, copying, facsimile scanning and network scanning jobs can be started.
Press to start copying.
Press to clear all selected settings and return the machine to the initial settings for the currently selected
mode. Before starting a copy operation, press the [CA] key first.
AR-M350 EXTERNAL VIEWS AND INTERNAL STRUCTURES 5-2
! " #
$ % & ' !