Sharp AR-M450 Service Manual page 130

66-20
Purpose Setup
Function (Content) Used to restore the backup data (SIM 66-19) to
SRAM. (When FAX is installed and FAX
expansion memory is installed.)
Section Fax
Item Operation
Operation/Procedure Read/write from Flash Memory(AR-MM9) to
SRAM is performed.
SIMULATION 66-20
SRAM BACK UP. (READ FROM FLASH ROM)
ARE YOU SURE ?
1. YES
2. NO
Press [START] key.
SIMULATION 66-20
SRAM BACK UP. (READ FROM FLASH ROM) EXCUTING...
After completion of reading
<Set value>
1 Read/Write executed
2 Read/write not executed
66-21
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to print the FAX information (registrations,
communication management, file management,
system errors). (Only when FAX is installed.)
Section Fax
Item Data
Operation/Procedure Information related to FAX is printed.
1) Select information to be printed.
2) The selected information is printed.
3) The paper size is automatically selected by
the size stored in the image memory.
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1.REGISTERED 2.MANAGEMENT
3.FILE MANAGEMENT 4.SYSTEM ERROR
5.PROTOCOL
Select 0 and
press [START] key.
If there is no data to be printed,
the display returns to the initial state.
SIMULATION 66-21
FAX INFORMATION PRINT OUT.EXECUTING...
1. REGISTERED
After completion of printing
<List of set values>
1 REGISTERED
2 MANAGEMENT
3 FILE
MANAGEMENT
4 SYSTEM ERROR System error information
5 PROTOCOL
66-22
Purpose
Function (Content)
Section
1
Item
Operation/Procedure The hand set sound volume is set.
1 SIMULATION 66-22
HANDSET VOLUME SETTING. SELECT 1-3, AND PRESS START.
1.MIN
2.MIDDLE
3.MAX
SIMULATION 66-22
HANDSET VOLUME SETTING. SELECT 1-3, AND PRESS START.
EXECUTING...
1.MIN
2.MIDDLE
3.MAX
Select 3 and press [START] key.
Same
display
SIMULATION 66-22
HANDSET VOLUME SETTING. SELECT 1-3, AND PRESS START.
EXECUTING...
1.MIN
2.MIDDLE
3.MAX
SIMULATION 66-22
HANDSET VOLUME SETTING. SELECT 1-3, AND PRESS START.
1.MIN
2.MIDDLE
3.MAX
0
<List of set values>
1 Min,
2 Middle
3 Max.
AR-M350 SIMULATIONS 10-69
Various registered information
Communication management information
Fine management information
Protocol information
Setup
Used to adjust the handset sound volume.
(Only when FAX is installed.)
Fax
Operation
1) Press START to set.
2) During execution, selection of 1, 2, and 3 is
possible.
Press [START] key.
Press [CUSTOM SETTING] key.
Press [CUSTOM SETTING] key.
2
2
3
3