Sharp AR-M450 Service Manual page 101

46-12
Purpose Adjustment
Function (Content) Used to adjust the print density in the FAX mode
(all modes). An adjustment with this simulation
affects all the reading density adjustment values.
(Only when FAX is installed)
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX auto adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START.
0. TRAY SELECT 1. COPY START
1
2. FAX EXP. LEVEL 50
Select other than 0 - 1,
and press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS
START.
2. FAX EXP. LEVEL
Select 1, and
Press [START] key.
press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4 5.BPT
<List of set values 1>
0 Paper feed tray selection
1 Copy start (Default)
2 FAX mode exposure setup
<List of display values 1>
Normal display
ERROR display Door open
Jam
paper empty
<List of set values 2>
1 TRAY1
2 TRAY2
3 TRAY3
4 TRAY4
5 Manual feed
1
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
NOW COPYING
DOOR OPEN.
JAM
PAPER EMPTY.
AR-M350 SIMULATIONS 10-40
46-13
Purpose Adjustment
Function (Content) Used to adjust the reading density in the FAX
mode (normal mode).
(Only when FAX is installed.)"
Section
Item Picture quality
Operation/Procedure The exposure mode to be set is selected.
(FAX normal text mode individual adjustment)
1) The current set value is highlighted on the
right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default: 50, set range: 0 - 99)
3) Press START, and copying is started and the
set value is stored. (Display value 1)
4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)
SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 0-5, AND PRESS START.
0. TRAY SELECT 1 1. PRINT START
1
2. EXP LEVEL
50
3. AUTO 4. LIGHT
Select other than 0 - 2,
and press [START] key.
SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL),INPUT VALUE 0-99, AND PRESS START.
2. AUTO
Select 1, and
press [START] key. Press [START] key.
SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). NOW COPYING.
Select 0, and
press [START] key.
SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Select 2, and
press [START] key.
SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 3-5, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO 4. LIGHT
1
50 50
5. DARK
Press [CUSTOM SETTING] key.
50
Press [CUSTOM SETTING] key.
Or copying is terminated.
Press [START] key or
press [CUSTOME SETTING] key.
1
Press [START] key or
press [CUSTOME SETTING] key.
1
5. DARK