Sharp AR-M450 Service Manual page 121

Main code 65
65-1
Purpose Adjustment
Function (Content) Used to adjust the touch panel
(LCD display section) detecting position.
Section Operation (display, operation)
Item
Operation/Procedure Adjust the coordinates of the touch panel.
Press the four cross marks on the LCD, and the
pressed mark will turn gray. When all four marks
are pressed, the adjustment is completed.
SIMULATION 65-1
65-2
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to check the result of the touch panel
(LCD display section) detecting position
adjustment. (The coordinates are displayed.)
Section Operation (display, operation)
Item
Operation/Procedure Check the touch panel. When the touch panel is
pressed, the coordinates (dot conversion values)
in X/Y directions are displayed.
SIMULATION 65-2
100 200 300
100
140
X: 600
180
Y:
200
400 500 600
40
AR-M350 SIMULATIONS 10-60
Main code 66
66-1
Purpose Setup
Function (Content) Used to set the FAX soft switch function.
(Used to utilize the FAX soft switch function.)
Section Fax
Item
Operation/Procedure Set the Fax soft switch.
(For details of the soft SW, refer to the AR-FX5
Service Manual.)
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Press START to rewrite the setting.
* SIM 1 cannot be changed with this simulation.
SIMULATION 66-1
FAX SOFT SW. SELECT 2 - 80, AND PRESS START.
Press [START] key.
SIMULATION 66-1
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
1
Press [CUSTOM SETTING] key
or [START] key.
1 2 3 4 5 6 7 8
00001001