Sharp AR-M450 Service Manual page 106

46-21
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to adjust the scanner exposure level.
(1 mode auto adjustment)
Section Scanner (reading)
Item Picture quality
Operation/Procedure 1) Select the exposure mode to be set.
(Scanner auto adjustment)
The current set value is highlighted on the
right of each item. (Set value)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default 50, set range 0 - 99)
* The set value is changed only, and printing is not performed.
SIMULATION 46-21
EXP. LEVEL SETUP SCANNER(AUTO SET). PRESS START.
0. SCANNER EXP. LEVEL 50
Press [START] key.
SIMULATION 46-21
EXP. LEVEL SETUP SCANNER(AUTO SET), INPUT VALUE 0-99,
AND PRESS START.
0. SCANNER EXP. LEVEL
<Set value>
0 Scanner mode exposure setup
46-22
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to adjust the scanner exposure level and to
make individual setup. (Normal mode)
Section Scanner (reading)
Item Picture quality
Operation/Procedure 1) Select the exposure mode to be set.
(Scanner
adjustment)
The current set value is highlighted on the
right of each item. (Set value)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default 50, set range 0 - 99)
* The set value is changed only, and printing is not performed.
SIMULATION 46-22
EXP. LEVEL SETUP SCANNER(NORMAL). SELECT 0-2, AND PRESS
START.
0. AUTO 50 1. LIGHT 50 2.DARK
Select 0 -2 and
press [START] key.
SIMULATION 46-22
EXP. LEVEL SETUP SCANNER(NORMAL), INPUT VALUE 0-99,
AND PRESS START.
0. AUTO
<Set value>
0 Auto
1 Bright
2 Dark
0
Press [START] key or
[CUSTOM SETTING] key.
50
normal text mode individual
1
50
Press [START] key or
[CUSTOM SETTING] key.
50
AR-M350 SIMULATIONS 10-45
46-23
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to adjust the scanner exposure level and to
make individual setup. (Small text mode)
Section Scanner (reading)
Item Picture quality
Operation/Procedure 1) Select the exposure mode to be set.
(Scanner small text mode individual adjustment)
The current set value is highlighted on the right of
each item. (Set value)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default 50, set range 0 - 99)
* The set value is changed only, and printing is not performed.
SIMULATION 46-23
EXP. LEVEL SETUP SCANNER(FINE). SELECT 0-5, AND PRESS START.
0. AUTO 50 1. LIGHT
3. AUTO(H) 50 4. LIGHT(H)
Select 0 -5 and
press [START] key.
SIMULATION 46-23
EXP. LEVEL SETUP SCANNER(FINE), INPUT VALUE 0-99,
AND PRESS START.
0. AUTO
<Set value>
0 Auto
1 Bright
2 Dark
46-24
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to adjust the scanner exposure level and to
make individual setup. (Fine mode)
Section Scanner (reading)
Item Picture quality
Operation/Procedure 1) Select the exposure mode to be set.
(Scanner fine mode individual adjustment)
The current set value is highlighted on the
right of each item. (Set value)
2) Set the exposure level with 10 digit key pad.
Press P to store the set value.
(Default 50, set range 0 - 99)
* The set value is changed only, and printing is not performed.
SIMULATION 46-24
EXP. LEVEL SETUP SCANNER(SUPER FINE). SELECT 0-5, AND PRESS
START.
0. AUTO 50 1. LIGHT
50
3. AUTO(H) 4. LIGHT(H)
Select 0 -5 and
press [START] key.
SIMULATION 46-24
EXP. LEVEL SETUP SCANNER(SUPER FINE), INPUT VALUE 0-99,
AND PRESS START.
0. AUTO
<Set value>
0 Auto
1 Bright
2 Dark
50 2.DARK 50
50 5.DARK(H) 50
1
Press [START] key or
[CUSTOM SETTING] key.
50
3 Auto (half tone)
4 Bright (Half tone)
5 Dark (Half tone)
50 2.DARK 50
50 50
5.DARK(H)
1
Press [START] key or
[CUSTOM SETTING] key.
50
3 Auto (half tone)
4 Bright (Half tone)
5 Dark (Half tone)