Sanyo VCC-P6784 Instruction Manual page 23

5
Specify the masking size and press the SET
button.
SIZE
111
111
• To set two or more masks, repeat steps
You may set up to 4 masks.
MEMO: If [ALARM SIGN] is set to "ON" (see page 27), when the camera receives
the alarm signal, the alarm indication "A" will be shown for all masks as
long as the time set in [DURATION] (see page 26). If [MOTION] is set to
"ON" (see page 24), the alarm indication "A" will also be shown when the
motion sensor detects any movement.
RReturns to the MASK
NO.SELECT screen.
3 to 5.
Hiding Partial Image <PRIVACY MASK>
■ To preview where masks are set
1 Select [PREVIEW] and press the SET button.
<Example: When 4 masks are set>
MASK 1 2
MEMO:
22
If two or more masks are overlapped,
3333 22
the smallest mask number will be
111 3333 shown.
111
4
4
3
4
2 When finished previewing the set masks, press the SET button
again to return to the Mask setting screen.
When masks are set, the monitor does not display the camera name
Note:
even if [TITLE] is "ON".
■ To delete a set mask
On the MASK NO. SELECT screen, set the mask number you
want to delete to "OFF".
■ To change the position or size of a set mask
1 On the MASK NO. SELECT screen, set the mask number whose
position/size you want to change to "ON" and press the SET
button.
4 and 5.
2 Repeat steps
22
GB