Handling And Operation - Zelmer 34Z010 User Manual

Handling and operation:

Remote controller fastening
Removable remote controller should be assembled or fastened firm in vertical
position in reference to the surface and simultaneously should be over the surface.
The optimum area to place the appliance is 30 cm from the wall where the remote
controller is fastened. There should be no objects between the appliances, because
the infrared signal can be transmitted in straight line only, In another case the scale
will not operate properly. The recommended height of remote controller location is
160 cm.
1. Weight measurement
Press button to switch remote controller on, you will see "HELO" on display. Tap the scales base, the control light shall change
colour from red to green. Stand steady on the scales to start analysis, when „0.0"shall appear on display. Read the result from the
display, when security „H" symbol appears on it. Step down from the scales and the display shall automatically go back to „0.0"
making new measurement possible, when some seconds unused, the display switches off.
When the remote controller is on, press
52
button to change weight measurement unit.
remote
controlle
GW34-005_v03