Attaching Idcs 64 Button Modules To An Idcs Keyset - Samsung OfficeServ 7200-S Installation Manual

Home Page
OfficeServ 7200-S INSTALLATION
TECHNICAL MANUAL PART 7 MAY 2010

ATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSET

First remove the base wedge from the iDCS 64 Button Module and attach the bracket to it
with two of the screws provided (see Figure 7.15).
Remove the base wedge of the keyset and place it to the right of the 64 Button Module and
attach the bracket/64 BM to the keyset with the remaining two screws.
The base wedge can now be replaced.
NOTE: If you wish to attach two 64 button modules to a keyset, connect the 64 button
modules together first and then attach them to the keyset.
7B / SINGLE LINE ULTRA BASE WEDGE AOM ULTRA BASE WEDGE
METAL CONNECTOR CLIP
7B/SINGLE LINE ULTRA BASE WEDGE 64BM ULTRA BASE WEDGE
METAL CONNECTOR CLIP
Figure 7.15 Attaching 7B/Single Line to AOM and 7B/Single Line to 64 Button Module
7.16