Home Page
OfficeServ 7200-S
INSTALLATION
TECHNICAL MANUAL
PART 2 MAY 2010
2.3.2 Required Tools
• A mid-sized Phillips screwdriver
• A bracket and three screws for attaching cabinet to rack mount
• Two brackets and six screws for rack mount
• Two screws for fastening
Figure 2.1 Tools Required for Rack Installation
2.3.3 Installing in a Rack
The procedure for installing the OfficeServ 7200-S cabinet inside a 19-inch rack is as follows:
1) Attach the cabinet bracket to the bottom surface of the OfficeServ 7200-S cabinet and
fasten the bracket firmly with the three screws.
Figure 2.2 Rack Installation (1)
2.2