OfficeServ 7200-S
TECHNICAL MANUAL
2.4.2 Wall Installation
The procedure for installing the OfficeServ 7200-S cabinet on a wall by using a wall bracket is
as follows:
CAUTION: Only mount OfficeServ 7200-S onto a wall capable of supporting the
weight of the cabinet; associated blocks, cables and peripheral equipment.
1) There are four screw holes (see [A] Figure 2.7) on the wall bracket as shown below. Mark
the four screw holes where the wall bracket should be installed.
Figure 2.6 Tools Required for Wall Installation
A
A
Figure 2.7 Wall Installation (1)
2.5
Home Page
INSTALLATION
PART 2 MAY 2010