Hyundai HYHT33 User Manual page 8

4. OPERATION
4.1 Starting the tool.
4.1.1 Start the tool only after the integrated piece has been correctly connected.
4.1.2 Put the operating switch at position "I".
4.1.3 Put the starting choke lever in position "Start".
4.1.4 Push the primer bulb 3-5 times.
4.1.5 Push throttle lock and throttle trigger to accelerate.
4.1.6 Push the throttle lock in at this position (cold).
4.1.7 Start the machine by carefully pulling the starter cable. Do this whilst holding
the machine against the ground.
Page 8 Rev 3