Installation Diagram - Wilson Electronics DB Pro 271265 Installation Manual

AG DB Pro Installation Diagram
Note: The Inside Panel Antenna
may be mounted on the wall
directly under the Outside
Antenna if 20 feet of vertical
separation can be maintained.
The preferred method for the best
coverage, place the antenna in
the ceiling.
Null Zone: The area under the
Outside Antenna, where the
Outside Antenna radiates the
least .
Note: A Lightning Surge Protector
is recommended for all building
installations (sold separately). Make
sure the protector is installed in line
between the Outside Antenna and
the Signal Booster.
3
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Outside
Antenna
(Wide Band
Antenna option
shown)
Inside Panel
Antenna
(Optional
second
antenna for
additional
coverage).
Power
Supply
Typical Installation
Before Getting Started
This guide will help you properly install your Wilson Electronics Signal
Booster . It is important to read through all of the installation steps
for your particular application prior to installing any equipment.
Read through the instructions, visualize where all the equipment will
need to be installed and do a soft installation before mounting any
equipment . Contact Wilson Electronics Technical Support Team with any
questions at: 866-294-1660 .
2-way/3-way/
4-way splitter
(if using multiple
Inside Antennas)
Lightning
Surge Protector
(Recommended)
Signal
Booster
Surge Protector
Powerstrip
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Inside Panel
Antenna
(Optional third
antenna for
additional
coverage).
4