Siemens CT636LE Series Instruction Manual page 60

calc'nClean
Takes about 26 minutes�
calc'nClean combines the functions Descale
and Clean� If both programmes are due
to be carried out close together, the fully
automatic coffee machine will automatically
suggest this service programme�
● Press button E�
● Turn the rotary selector to select
"calc'nClean"�
● Press button C� The display
indicates the progress of the programme�
● Clean the beverage outlet and replace,
empty the drip trays and replace�
● Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
● Remove the water filter (if there is one)
and press C
● Pour lukewarm water into the empty
water tank up to the "0�5 l" mark and
then dissolve one Siemens descaling
tablet TZ80002 in it� For the TZ60002 you
should always dissolve two tablets�
F If there is not enough descaling
solution in the water tank, you will
be asked to do the following� Refill
using uncarbonated water and press
C again�
● Remove the milk tube from the milk
container and fix the connecting part to
the right side of the beverage outlet with
the magnet�
● Close the appliance door�
● Place a container with a capacity of
0�5 litre under the beverage outlet�
● Put the end of the milk tube into the
container�
● Press button C�
The programme will now run for about
19 minutes�
● Remove the container and press
C�
● Rinse the water tank and (if removed)
replace the water filter.
● Fill the tank with fresh water up to the
"max" indicator�
● Replace the water tank and close the
door�
● Place the container underneath the
beverage outlet again�
● Put the end of the milk tube into the
container�
● Press button C�
The programme will now run for about
7 minutes and rinse the appliance�
● Remove the container, empty the drip
trays, replace and close the appliance
door�
● Press C� The appliance
is descaled, cleaned and ready for
use again�
● Press E to exit the program�
Special rinsing
F Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
● Rinse the water tank and refill it with fresh
water up to the "max" mark�
● Press button C� The
programme will now run for about
2 minutes and rinse the appliance�
● Empty the drip trays, replace and close
the appliance door� The appliance is
ready for use again�
● Press E to exit the program�
en
55