Using Wia Driver - Oki mc series Configuration Manual

Advanced Mode
You can adjust in detail how a document is scanned.
1. Follow the procedure for
MC342dw, MC352dn, MC362dn, MC362w, MC562dn, MC562w, MC562dw, ES3452
MFP, ES5462 MFP, ES5462dw MFP))" on page 45
2. Select Advanced from Mode.
3. Change the settings if necessary.
4. Click Scan to start scanning.
If you want to finish the setting, click Quit.
U WIA D
SING RIVER
The WIA driver does not support the network scan function. Connect the machine with the
computer via USB or WSD Scan.
The WIA driver does not support Mac OS X.
The WIA 2.0 driver supports Windows 8/ Windows Server 2012/ Windows 7/ Windows
Server 2008 R2.
The WIA 1.0 driver supports Windows Vista/ Windows Server 2008/ Windows XP/ Windows
Server 2003.
Starting a Scan Job
MEMO
The explanations in this section use PaperPort as an example, and may differ
from the description depending on your application.
1. Place your document with text face up in the ADF or face down on the document glass.
NOTE
When the "PC Scan Mode" is set to Manual Scan Mode or Secure Scan Mode,
implement steps 2 and 3.
2. Press the SCAN key.
3. Press the to select Remote Scan and then press OK.
4. Start PaperPort on your computer.
5. Click Select and then click WIA: MC5(3)x2/ES5(3)4x2 (MC332dn, MC342dn,
MC342dw, MC352dn, MC362dn, MC362w, MC562dn, MC562w, MC562dw, ES3452
MFP, ES5462 MFP, ES5462dw MFP) or WIA: MPS2731mc (for MPS2731mc).
6. Click Scan.
7. Select a paper feeding method.
8. Select a document type.
9. Specify the area to be scanned.
10. Click Scan.
11. Click Cancel when scanning is finished.
12. When there is no continued page or the back side is not scanned, click Finish.
The scanned image is displayed in PaperPort.
"Starting a Scan Job (for Mac OS X (MC332dn, MC342dn,
Configuring the Scan to Computer and Remote Scan > 47
through step 8.