Oki mc series Configuration Manual page 143

ITEM OPTION
Print Setup System
(cont.) Configuration
Menu
(cont.)
PCL Setup
Auto Continue
Error Report
Font Source
Font No.
Font Pitch
Font Height
Symbol Set
A4 Print Width
White Page Skip
CR Function
LF Function
Print Margin
True Black
Appendix A - menu system > 143
VALUE/DESCRIPTION
ON, OFF Determines whether or
not the MFP will
automatically recover
from a memory
overflow condition.
ON, OFF If ON, the MFP will
print error details
when a PostScript
emulation error
occurs.
Resident, Resident2 Specifies the location
of the PCL default font.
I0 ~ I90 Sets the PCL font
number.
0.44~10.00~ Sets the width of the
99.99 CPI PCL default font.
4.00~12.00~ Sets the height of the
999.75 point(s) PCL default font.
PC-8 PCL symbol set. If the
font source and
number are changed
to one which does not
support the selected
symbol set, this must
be changed to an
available symbol set
for that font.
78 Column, Sets the number of
80 Column columns subject to
Auto LF with A4 paper
in PCL. This is the
value when Auto CR/
LF Mode is set to OFF
with the 10CPI
character.
ON, OFF Selects whether blank
pages are printed or
not.
CR, CR+LF Selects whether a
received carriage
return character (0Dh)
also causes a line
feed.
LF, CR+LF Selects whether a
received line feed
character (0Ah) also
causes a carriage
return.
Normal, Sets the non-printable
1/5 inch, 1/6 inch page area. Normal is
PCL compatible.
ON, OFF Selects whether black
image data is printed
using black toner (True
Black ON) or 100%
CMY. (Valid in PCL
emulation mode only.)