Oki mc series Configuration Manual page 141

ITEM OPTION
Print Setup Color Menu
(cont.)
Density Control
Adjust Density
Color Tuning/Print Pattern
Cyan Highlight
Cyan Mid-Tone
Cyan Dark
Magenta Highlight
Magenta Mid-Tone
Magenta Dark
Yellow Highlight
Yellow Mid-Tone
Yellow Dark
Black Highlight
Black Mid-Tone
Black Dark
Cyan Darkness
Magenta Darkness
Yellow Darkness
Black Darkness
Appendix A - menu system > 141
VALUE/DESCRIPTION
Auto, Manual If set to Auto, image
density will be
automatically adjusted
at power on, when a
new image drum or
toner cartridge is
installed, and at
intervals of 100, 300
and 500 drum counts.
If a 500 drum count
interval occurs during
a print job it will occur
at the end of that job,
and will take up to 55
seconds. If set to
manual, this
adjustment will only
be performed when
initiated by the next
menu item.
Execute Selecting this will
perform the auto
density set up
immediately.
Execute Selecting this item
prints the color tuning
pattern to help you
adjust the color
balance.
-3 ~ 0 ~ +3 Adjusts image density
for each color
-3 ~ 0 ~ +3
component (cyan,
magenta, yellow and
-3 ~ 0 ~ +3
black). Normal setting
is 0.
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3
-3 ~ 0 ~ +3 Adjusts darkness of
each color (cyan,
-3 ~ 0 ~ +3
magenta, yellow and
black). Normal setting
-3 ~ 0 ~ +3
is 0.
-3 ~ 0 ~ +3