Table of Contents
Advertisement
Available languages
Available languages
CONNECTING wITh ThE COMPUTER
System requirements
Your computer system must meet the following requirements:
•
Pentium 200MHz or above
•
Microsoft Windows 2000/ XP/Vista
•
120MB of available hard disk space
•
USB port supported
Battery Installation
1)
Remove the USB cap.
2)
Remove the battery cover on the back of the player by sliding it in the direction of the arrow
as shown on the player.
3)
Insert a AAA battery into the battery compartment.
4)
Push the battery cover back into the player.
Battery level indication
The approximate power levels of your battery are indicated as follows:
Full
Two-thirds full
Copy Files from computer
Files can be transferred directly into the player by using the USB connector.
1)
Make sure that your computer has been started before you start.
2)
Pull off the USB cap.
3)
Push the USB connector into a free USB port on your PC.
4)
The computer system detects "New hardware" and starts to install the driver automatically.
Wait for the system to finish the installation. When it has finished, a new "Removable Disk"
will be created in "My Computer".
5)
Drag and drop the files on your computer to the "Removable Disk".
6)
To disconnect the player from the computer, double click the Safely Remove Hardware
icon on the task bar. Click the USB Mass Storage Device, and then click OK. Then you can
unplug the player safely.
Note: Please do not disconnect the player from the computer during file transferring. It may
cause malfunction of the player and the files.
BASIC OPERATION
Turn on/off the Player
Make sure the battery is sufficient and the headphone is connected.
•
To turn on the player, press and hold the [
•
To turn off the player, press and hold the [
Ustawienia głośności
•
To increase the volume, press the [▲] button while music playing.
•
To decrease the volume, press the [▼] button while music playing.
Half full
Low
] button.
] button.
ENG - 45
ENG
Empty
Advertisement
Chapters
Table of Contents
