Communication With Pc - Hyundai MP1281 User Manual

COMMUNICATION WITH PC

1. Transferring files from your PC
If your computer is running Windows Me or later the MP3 Player does not require any special
software. When it is connected to your PC it will appear as a mass storage device and as such
can be used to store any PC files and folders. The following procedure is an example based on
a computer running Windows XP. It assumes that your PC is already powered on.
1) Plug the MP3 Player into one of your PC's USB ports. The LCD screen will show "Rea-
dy" when it is successfully connected with PC.
2) A window will pop up on your PCs task bar stating that a new hardware has been found
and that it is a mass storage device. This will then change to a message stating that the
new hardware is ready to use.
3) Open "My Computer" on your PC. You should see the new device listed in your disk dri-
ves.
NOTE: If the new drive is not listed it may be necessary to renovate your PC screen or restart
your computer.
4) You can simply copy files to the new drive as you would any other disk drive. Similarly
files can be deleted from the new drive as you would any other disk drive. When files are
being transferred from your PC to the MP3 player, a "writing" sign will show on the scre-
en. If files are transferring from the MP3 player to your PC, a "Reading" sign will show
on the screen.
NOTES: Do not disconnect your MP3 player while files are being transferred as this will corrupt
the data. The file structure will be preserved. When playing for the first time any files in the root
directory will be played first followed by any files stored in folders.
5) Once the files have been transferred, click on the "remove hardware safely" icon on the
PC's task bar. A window will pop up and the USB mass storage device will be listed.
Click on the USB mass storage device. The PC will then state when it is safe to remove
the hardware.
ENG - 34