Basic Function; Radio Operation - Hyundai TRC 567A3 Instruction Manual

BASIC FUNCTION

GENERAL OPERATION
- At standby mode, press the "STANDBY" button to switch on the system.
(CD mode as default mode when switch on the system.)
- Press the "FUNCTION" button to switch the system to RADIO mode.
- Press the "STANDBY" button again to switch off the system.
(No matter in which mode.)

RADIO OPERATION

GENERAL OPERATION
1) Press the "FUNCTION" button to select "RADIO" mode.
2) Press the "BAND" button to select AM or FM.
3) Adjust radio frequency to your desired station by using the "TUNING" control.
FOR BETTER RECEPTION
FM – This appliance has a FM antenna located at the rear cabinet. This wire is completely
unraveled and extended for better reception.
AM – This appliance is equipped with a built-in directional ferrite AM antenna. Rotate the
appliance to get better reception.
CD / MP3 OPERATION
GENERAL OPERATION
PLAY/PAUSE
SKIP + &
SKIP −
STOP
PLAYBACK
1) Press the "FUNCTION" button to select "CD" mode.
2) Open the CD door and place a CD/MP3 disc with the label up in the CD compartment.
3) Close the CD door.
4) Focus search is performed if disc is inside.
For CD disc – Total number of tracks is read and appears on the display.
For MP3 disc – "MP3" appears on the display.
5) Playback will start automatically from the first track.
6) Press the "VOL +" or "VOL −" button to adjust the volume to desired level.
7) Press the "PLAY/PAUSE" button again when you want to stop playback temporarily.
8) Press the "STOP" button when finished.
FOLDER SELECT
Press the "ALBUM" button to select folder. (Folder select function can only operate if disc store
with at least 2 directories/files.)
Press to start playing CD/MP3 disc.
Press again to stop playing CD/MP3 operation temporarily.
Press again to resume playback.
Press to go to the next track or back to the previous track.
Press and hold while playing until you find the point of the sound.
Press to stop all CD/MP3 operation.
EN - 31
EN