Webguard - Eneo DLR1.2/04&250DV Operating Instructions Manual

User's Manual
For example, if you want to search for Coke with a Qty (Quantity) of more than 1 and Hotdog with an amount totaling
over $8, the following search condition can be set.

WebGuard

WebGuard allows you to access a remote DVR, monitor live video images and search recorded video using Internet
Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
Operating System: Microsoft
CPU: Intel Pentium III (Celeron) 600MHz or faster
RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the following information
in the address field.
"http://IP address:port number" (The DVR IP address and the WebGuard port number (default: 12088) set in the
–
Network setup screen (WebGuard tab))
Or, "http://DVRNS server address/DVR name" (The DVRNS server address and the DVR name registered on the
–
DVRNS server)
Or, "http://www.dvronline.net" (Entering the DVR IP address or the DVR name will be required when logging in)
–
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the WebGuard program by
entering http://www.dvronline.net. Selecting the Use DVRNS option allows you to enter the DVR name registered
on the DVRNS server instead of the IP address. You must enter the DVRNS server address and port number in the
SETUP setting when selecting the Use DVRNS option.
NOTE: The port numbers for WEBWATCH and WEBSEARCH should be the same with port numbers for Remote
Watch and Remote Search set during Network setup.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally load the
information of the previous version. In this case, delete the temporary internet files by selecting Tools
Options General tab, and then run WebGuard again.
54
® ®
Windows 2000, Microsoft
Select between the WEBWATCH (Web monitoring) and
WEBSEARCH (Web search) modes and enter the appropriate port
number of the program. Entering ID and PASSWORD and clicking
the [LOGIN] button logs in using the selected mode. Selecting Save
ID saves the ID you entered.
® ®
Windows XP or Microsoft
® ®
Windows Vista
Internet