Table of Contents
Advertisement
User's Manual
Highlight the VGA tab, and the VGA setup screen appears.
Figure 32 ─ VGA setup screen.
Highlight the box Test box and press the
Remote Control
Highlight Remote Control in the Devices menu and press the
you to select a port and make correct settings for a remote keyboard.
Figure 33 ─ Remote Control setup screen.
24
button to test how the screen will be displayed with the resolution you set.
Highlighting OK and pressing the
Highlight the box beside Resolution and press the
You can select from 800x600, 1024x768 and 1280x1024.
Highlight Full Screen and press the
button toggles between On and Off. When it is On, the
screen on the VGA monitor displays in full screen mode.
button applies resolution changes.
button. The Remote Control setup screen allows
Highlight the box beside Port and select between None, RS232
and RS485. If the RS232 port and RS485 port is in use for
PTZ control, networking or text input, the remote keyboard
cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity,
Data Bits and Stop Bits for the device you are connecting to
the DVR.
Highlight the box beside Remote Control Product and select
the device from the list.
button.
button. Pressing the
Advertisement
Table of Contents
