Unpacking and Inspection
UNPACKING AND INSPECTION
ENTASYS 200 loudspeakers are carefully packed in sturdy cartons. However, it's wise to thoroughly
inspect each unit after it has been removed from the packaging, as damage may have occurred
during shipping.
SHIPPING CLAIMS
If the product is damaged during transit you must file a damage claim directly with the freight
company. Be sure to save the carton and packing materials, as damage claims can be denied if these
materials are not retained. If evidence of physical damage exists upon arrival, be cautious before
signing a delivery acceptance receipt. Often the fine print will waive your right to file a claim for
damage or loss after you sign it. Make sure that the numbers of cartons shown on the freight
documents have actually been delivered.
It's always a good idea to retain the carton and packing materials indefinitely, if possible, in the event
that the unit may need to be returned to your dealer or distributor for repair in the future.
IN THE CARTON
Carton Contents:
One (1) Column Loudspeaker (model ENT203, 206, 212 or 220)
One (1) Pan-Tilt Mount Bracket (Assembled)
One (1) Operation and Installation Manual
One (1) Warranty Card
Listed below are additional contents included in the carton for each model noted.
Models ENT203/ENT206 contains the following hardware in one bag:
Four (4) 3.5x16mm Phillips Truss Head Deep Thread Screws SS
One (1) Safety Cable Bracket (black or white)
One (1) Input Cover (black or white)
Four (4) 2.5x16mm Phillips Flat Head Sheet Metal Screws SS
Models ENT212/ENT220 includes (2) Side Arm Clamps, and the following hardware in one bag:
Four (4) 3.5x16mm Phillips Truss Head Deep Thread Screws SS
One (1) Safety Cable Bracket (black or white)
One (1) Input Cover (black or white)
Four (4) 2.5x16mm Phillips Flat Head Sheet Metal Screws SS
(2) M5x30 Hex Head Screws SS
(2) M5 Hex Nuts SS
(2) 5mm Lock Washers SS
(4) 5mm Flat Washers SS
ENTASYS 200 Installation/Operation Manual — Page 4
Need help?
Do you have a question about the ENTASYS 200 and is the answer not in the manual?