Checking Power Steering Fluid; Changing Engine Oil - Mercury 200 Verado Manual

Hide thumbs Also See for 200 Verado:
Table of Contents

Advertisement

Checking Power Steering Fluid

Remove power steering cover and fill cap to check fluid level. The
fluid level should be slightly below the bottom of the fill hole. Use
SAE 0W-30 synthetic power steering fluid, if needed.
a -
Power steering cover
b -
Fill cap
Tube Ref No.
Synthetic Power
Steering Fluid SAE
138
0W-30

Changing Engine Oil

ENGINE OIL CAPACITY
Engine oil capacity is approximately 7.0 liters (7.4 quarts).
PUMP METHOD
IMPORTANT: Tilt outboard out/up past vertical for approximately
one minute to allow trapped oil to drain back to the oil sump.
IMPORTANT: To reduce or prevent oil spillage when removing the
oil filter, make sure that the outboard is upright (not tilted) and the
engine is cold or has not run for at least one hour.
MAINTENANCE
a
Description
b
c -
Fill/full level
Where Used
Power steering system 92-858002K01
122
c
ob01527
Part No.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

225 verado250 verado275 verado

Table of Contents