Shadow Mode Control Features And Operation - Mercury 200 Verado Manual

FEATURES AND CONTROLS
NOTE: There is a 10 second time frame to complete a helm
transfer. If the helm transfer is not completed, the action will be
cancelled and a double beep will sound. Pressing the
"TRANSFER" button again will re-initiate a helm transfer.
Synchronizing Helms Prior To Transfer
Pressing the "TRANSFER" button allows the boat operator 10
seconds to match up the control handle settings at the new helm
with the handle settings that are at the old (to be inactive) helm. If
the handles are not matched, the neutral lights will flash. The light
blinks faster as the handles are nearing match position. Once the
light stays on continuously, the handles are matched and the
button can be pressed again to complete the transfer. This
completes the transfer process, and gives control to the new
station. If the helm transfer is not completed within 10 seconds, the
action will be cancelled.

Shadow Mode Control Features and Operation

TRIPLE ENGINE THROTTLE AND SHIFT OPERATION
Movement of the handles on the remote control allows the boat
operator to control the engine throttle speed and gear shift
positions of all three engines.
The throttle and shift function is dependant on what engines are
running. Refer to the following table.
NEUTRAL
TROLL
-
+
SYNC
TRANSFER
THROTTLE
ONLY
63
22593