Mercury 200 Verado Manual page 98

MANUAL TILTING
If the outboard cannot be tilted using the power trim/tilt switch, the
outboard can be manually tilted.
NOTE: The manual tilt release valve must be tightened before
operating the outboard to prevent the outboard from tilting up
during reverse operation.
1. Turn out
counterclockwise. This allows manual tilting of the outboard.
Tilt the outboard to the desired position and tighten the manual
tilt release valve.
AUXILIARY TILT SWITCH
The auxiliary tilt switch can be used to tilt the outboard up or down
using the power trim system.
FEATURES AND CONTROLS
the manual
ob01143
tilt release
ob01309
90
valve 3 turns