Mercury 200 Verado Manual page 117

2. Remove crankcase ventilation hose.
a - Crankcase ventilation
hose
b - Fuel System Module
(FSM) purge valve
hose
3. Remove air filter assembly and disconnect Fuel System
Module (FSM) purge valve hose by rotating the air filter
assembly and pulling on hose.
4. Wash air filter assembly in warm soap water.
5. Dry filter assembly with compressed air.
6. Apply 4-Cycle Outboard Oil on rag or towel and lightly pad air
filter element. Wipe off excess oil. Air filter element should be
moist to the touch.
MAINTENANCE
a
d
109
b
c
3664
c - Filter assembly
d - Clamp screw
3665