Removing A Memory Module; Installing A Memory Module; Concluding Steps - Fujitsu PRIMERGY CX2550 M1 Upgrade And Maintenance Manual

Main memory
7.4.2

Removing a memory module

Ê Identify the defective memory slot.
Ê Remove the defective memory module as described in section
memory modules" on page
7.4.3

Installing a memory module

Ê If applicable, prepare the new memory module as described in section
"Preparing the memory modules" on page
Ê Install the new memory module as described in section
modules" on page
7.4.4

Concluding steps

Perform the following procedures:
"Installing the memory slot air ducts" on page 49
Ê
Ê Connect the SATA cable(s) to the connectors on the system board described
in section "Cabling for HDD 2.5"" on page
described in section
Controller" on page
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Updating or recovering the system board BIOS and iRMC" on page 61
Ê
applicable)
"Verifying the memory mode" on page 74
Ê
"Resetting the error status after replacing memory modules or processors"
Ê
on page 86
128
124.
121.
"Cabling onboard" on page 208
209.
Upgrade and Maintenance Manual
202.
"Installing memory
208, and reroute the cables as
or "Cabling with RAID-
(if applicable)
"Removing
(if
CX2550 M1