9.2.3.3
Re-installing the SATA DOM
Ê Secure the SATA DOM module on the SATA DOM spacer with the nylon
screw as described in
9.2.3.4
Concluding steps
Perform the following procedures:
"Installing the server node in the server enclosure" on page 50
Ê
Ê If applicable, reconnect all external cables.
"Controls and indicators on the server node" on page 51
Ê
"Enabling SVOM boot watchdog functionality" on page 72
Ê
CX2550 M1
"Installing the SATA DOM board" on page
Upgrade and Maintenance Manual
System board and components
153.
163