Replacing The Riser Card - Fujitsu PRIMERGY CX2550 M1 Upgrade And Maintenance Manual

Expansion cards
6.4.1.2

Replacing the riser card

Figure 31: Replacing the riser card
The riser module consists of the riser metal bracket and the riser card.
The riser card is connected to the riser metal bracket with two rivets:
– Rivet (1).
– Rivet with bolt (2).
Ê For removing the riser card loosen the two rivets and take off the riser card.
Ê For installing the new riser card put the riser card on the riser metal bracket
and fasten the two screws.
Upgrade and Maintenance Manual 115
CX2550 M1