Onscreen Display; Audio Input Select - Panasonic TH-55AF1U Operating Instrctions

●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Primary backup input
When the conditions for the Backup Input function
are met, the following screen is displayed.
Backup mode OK
Note
● This menu will be greyed out and cannot be set under
the following conditions.
[Input lock] is set to [OpenPort PLATFORM]. (see
•
page 93)
[Input search] is set to the item other than [Off].
•
(see page 88)
● With the USB input, the unit determines video signals
are interrupted by judging the USB memory is not
connected to the USB terminal.

Audio input select

Set up the sound when a video input is selected.
1
Select the video input with
Set the audio input with
Audio input select
OpenPort PLATFORM
HDMI1
HDMI2
DVI-D
PC
COMPONENT
VIDEO
● The illustration above shows the factory settings.
Video input
OpenPort
PLATFORM
HDMI1
HDMI2
DVI-D / PC /
COMPONENT* /
VIDEO
No audio: No audio input (Mute)
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
92
English
16:9
.
OpenPort PLATFORM
HDMI1
HDMI2
AUDIO1 IN
AUDIO1 IN
AUDIO2 IN
AUDIO2 IN
Audio input
OpenPort PLATFORM /
AUDIO1 IN / AUDIO2 IN /
No audio
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
AUDIO1 IN / AUDIO2 IN /
No audio
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.

Onscreen display

Set to display / hide the following Onscreen display.
●
Power on display
● Input signal switch display
● No signal display
●
No external media display (at USB input)
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
.
[Off] / [OpenPort PLATFORM] / [HDMI1] / [HDMI2] /
[DVI-D] / [PC] / [COMPONENT]* / [VIDEO] / [USB]
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Note
This menu is available only when [Input lock] is [Off].
(see page 93)
Initial VOL level
Adjusts the sound volume level when the unit is turned
on.
[Off]:
It will be the sound volume level which had been
set before the power of the unit was turned off.
[On]:
Sets your preferred volume.
● Outputs with the set volume when [Initial VOL level] in
[On] state is selected on the menu.
■
To adjust sound volume level
Press <VOL +> <VOL ->.
Note
● When [Maximum VOL level] is [On], the volume
cannot be set to the level higher than the level set for
[Maximum VOL level].
HDMI1
16:9
AUDIO1 IN