Table of Contents
Advertisement
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Primary backup input
When the conditions for the Backup Input function
are met, the following screen is displayed.
Backup mode OK
Note
●
When [Input search] is not set to [Off], this menu will
be greyed out and cannot be set. (see page 60)
●
With the USB input, the unit determines video signals
are interrupted by judging the USB memory is not
connected to the USB terminal.
Audio input select
Set up the sound when a video input is selected.
1
Select the video input with
Set the audio input with
Audio input select
HDMI1
HDMI2
DIGITAL LINK
DVI-D
PC
COMPONENT
VIDEO
Video input
HDMI1
HDMI2
DIGITAL LINK
DVI-D / PC /
COMPONENT* /
VIDEO
64
English
16:9
16:9
.
HDMI1
HDMI2
DIGITAL LINK
AUDIO1 IN
AUDIO1 IN
AUDIO2 IN
AUDIO2 IN
Audio input
HDMI1 / AUDIO1 IN /
AUDIO2 IN / No audio
HDMI2 / AUDIO1 IN /
AUDIO2 IN / No audio
DIGITAL LINK / AUDIO1 IN /
AUDIO2 IN / No audio
AUDIO1 IN / AUDIO2 IN /
No audio
No audio: No audio input (Mute)
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 46)
When the setting for the audio input has been
changed from the factory settings, the audio input is
displayed as below.
Onscreen display
Set to display / hide the following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
No external media display (at USB input)
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
Initial input
Adjusts the input signal when the unit is turned on.
.
[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D] /
[PC] / [COMPONENT]* / [VIDEO] / [USB]
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 46)
Note
●
This menu is available only when [Input lock] is [Off].
(see page 65)
Initial VOL level
Adjusts the sound volume level when the unit is turned
on.
[Off]:
It will be the sound volume level which had been set
before the power of the unit was turned off.
[On]:
Sets your preferred volume.
●
Outputs with the set volume when [Initial VOL level] in
[On] state is selected on the menu.
HDMI1
16:9
AUDIO1 IN
Advertisement
Table of Contents
