Id Remote Control Function; Setting The Remote Control's Id Number; Cancelling The Setting Of Remote Control's Id Number - Panasonic TH-55AF1U Operating Instrctions

ID Remote Control
Function
You can set the remote control ID when you want to use
this remote control on one of several different displays.
In that case, you need to set the remote control's ID
number to match the Display's ID number you have set
in [Display ID] following the steps below.
Note
●
To operate this function, please purchase
ID remote controller sold separately.
Object model: N2QAYA000093
● When operating the OpenPort PLATFORM part
on this ID remote control, the <DEFAULT> button,
<RETURN> button and number <6> button operate
as the <HOME> button, <BACK> button and
<KEYBOARD> button respectively.
Setting the remote control's ID
number
1
Set [Controller ID function] to [On].
(see page 94)
●
While displaying [Options] menu, you can operate
even if the ID does not match.
2
Set the remote control's <ID MODE>
switch to <ON>.
3
Pointing the remote control at the
Display you want to control, press <ID
SET>.
ID set
Display ID
Controller ID
4
Press one of <0> - <9>.
Sets the tens digit.
5
Press one of <0> - <9>.
Sets the units digit.
●
The steps from 3 to 5 need to be done within 5
seconds.
●
Adjustable ID number range is 0 - 100.
Example:
To set the ID to "1": After step 3, press <0> and
•
then <1>.
To set the ID to "12": After step 3, press <1>
•
and then <2>.
To set the ID to "100": After step 3, press <1>
•
<0> <0>.
Cancelling the setting of remote
control's ID number (ID "0")
You can operate even if the ID does not match the ID set
in [Display ID].
Press <ID SET> for more then 3 seconds.
This has the same effect as pressing <ID SET> <0>
<0>.
Note
●
The ID remote control cannot be used when [Display
ID] is set to anything other than "0", and the remote
control ID is not the same as the [Display ID] number.
(see page 94)
0
?
English
109